Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 27 Next »

Overview

In Upvise, you can manage Pre-starts and equipment maintenance directly from the mobile application. You can create your own custom daily pre-start checklists which can be filled in by your operators at the start of the day before operating the plant. At the time you complete pre-starts, you can record punch items (defects).
Based on the maintenance intervals defined by you, you can get alerts when maintenance is overdue.

Getting Started

Before you start using Upvise for Equipment maintenance, there is some configuration required to get you started.

Equipment and Equipment Categories sync from the workbench plant module.

You can maintain plant categories in Upvise to manage and define the utilisation and maintenance intervals of each category.

 1. Configuring Equipment Categories

  1. Go to the equipment module

  2. Click on “options”

  3. Select “categories”

  4. You will see a list of the plant groups/ equipment categories as they have synced from workbench. Here inside each category is where you will set the following:

    1. Utilisation Monthly Minimum

    2. Pre-start intervals

    3. Pre-start form

    4. Maintenance intervals

    5. Servicing Form

 2. Configuring Jobs Groups

  1. Go to the Jobs module

  2. Click on “Options”

  3. Select “groups”

  4. Add the following groups- used exclusively for Plant Maintenance:

    1. Scheduled Service

    2. Unplanned Service

    3. Accident Damage

    4. Improvement / Modification

    5. Other

image-20240108-015735.png

You can add additional groups if required for other purposes however any other Job Group will be categorised as “Other” in workbench.

  1. Go back to option, Vehicles

    image-20240108-015847.png

  2. Select all relevant “Equipment Groups” to be used for Job Scheduling:

    image-20240108-015930.png

Process Chart:

image-20240104-033209.png

 Pre-Start

  1. log into upvise on your mobile app and navigate to “Equipment” module.

  2. Here you can locate the equipment via:

    1. The “Equipment” list

    2. Categories

    3. “Lookup” option where you can scan a QR code

  3. Once you have the equipment open, you will see a blue button “Daily Checklist”. You will click this to initiate your prestart

  4. You will see the “last hours” (or last kms). There will be a field called “current Hours” where you input the current odometer reading of your equipment.

  5. Click Save, then click “Start”

  6. You will be taken into the pre-start form for that equipment.

  7. Complete the form and submit it.

  8. end process

Completing an Equipment Maintenance on the mobile:

 Perform Maintenance

  1. When an equipment is due for maintenance, the equipment shows on the mobile in orange. You will see a “perform maintenance” button where you can initiate the service/ maintenance record on the equipment

  2. Click on “Perform maintenance”

  3. Fill in the service record & submit the form

  4. If using workbenches standard Service forms, the Kms/Hours will be updated on the equipment utilisation.

  5. The maintenance alert will disappear and the equipment will show as normal again

    end process

  • No labels