Page Comparison

Overview

In Upvise, you can manage complete Pre-starts and equipment maintenance directly from the mobile application. You can create your own custom daily pre-start checklists which can be filled in by your operators at the start of the day before operating the plant. At the time you complete pre-starts, you can record punch items (defects).Based on the maintenance intervals defined by you, you can get alerts when maintenance is overdue

You can define maintenance intervals per Equipment Category, maintenance intervals can have 2 dimensions a time-based dimension and a usage-based dimension. The usage dimension can be defined as either hourly or kilometres. You can define an early warning interval for each dimension. Once an Interval for either dimension has been reached the equipment will automatically be flagged as due for maintenance.

Getting Started

Before you start using Upvise for Equipment maintenance, there is some configuration required to get you started.

...

Expand

title	1. Configuring Equipment Categories

Go to the equipment module
Click on “options”
Select “categories”
You will see a list of the plant groups/ equipment categories as they have synced from workbench. Here inside each category is where you will set the following:
1. Utilisation Monthly Minimum
2. Pre-start intervals
3. Pre-start form
4. Maintenance intervals
5. Servicing Form

Expand

title	2. Configuring Jobs Groups

...

Process Chart:

...

title	Pre-Start

log into upvise on your mobile app and navigate to “Equipment” module.
Here you can locate the equipment via:
1. The “Equipment” list
2. Categories
3. “Lookup” option where you can scan a QR code
  Image Removed
Once you have the equipment open, you will see a blue button “Daily Checklist”. You will click this to initiate your prestart
Image Removed
You will see the “last hours” (or last kms). There will be a field called “current Hours” where you input the current odometer reading of your equipment.
Image Removed
Click Save, then click “Start”
Image Removed
Image Removed
You will be taken into the pre-start form for that equipment.
Complete the form and submit it.
Image Removed
end process

Completing an Equipment Maintenance on the mobile:

When an equipment is due for maintenance, the equipment shows on the mobile in orange. You will see a “perform maintenance” button where you can initiate the service/ maintenance record on the equipment

Image Removed

Click on “Perform maintenance”

Fill in the service record & submit the form

Image Removed

If using workbenches standard Service forms, the Kms/Hours will be updated on the equipment utilisation.

The maintenance alert will disappear and the equipment will show as normal again

Image Removedend process

Expand

title	Perform Maintenance

& Settings

Go to the Jobs module
Click on “Options”
Select “groups”
Add the following groups- used exclusively for Plant Maintenance:
1. Scheduled Service
2. Unplanned Service
3. Accident Damage
4. Improvement / Modification
5. Other

Image Added

You can add additional groups if required for other purposes however any other Job Group will be categorised as “Other” in workbench.

Go back to option, Vehicles
Image Added
Select all relevant “Equipment Groups” to be used for Job Scheduling:
Image Added

Expand

title	3. Pre-Start Settings- Always Show Daily Checklist

A NEW setting has been introduced, “Always show Prestart button on mobile”. When enabled, the Daily Checklist option will always show.
Admin users can apply the new setting in the Equipment Web app > Options > General