...
| Expand |
|---|
|
log into upvise on your mobile app and navigate to “Equipment” module. Here you can locate the equipment via: The “Equipment” list Categories “Lookup” option where you can scan a QR code 
Once you have the equipment open, you will see a blue button “Daily Checklist”. You will click this to initiate your prestart  You will see the “last hours” (or last kms). There will be a field called “current Hours” where you input the current odometer reading of your equipment.  Click Save, then click “Start”   You will be taken into the pre-start form for that equipment. Complete the form and submit it.  end process
|
Completing an Equipment Maintenance on the mobile:
| Expand |
|---|
|
When an equipment is due for maintenance, the equipment shows on the mobile in orange. You will see a “perform maintenance” button where you can initiate the service/ maintenance record on the equipment  Image AddedClick on “Perform maintenance” Fill in the service record & submit the form  Image AddedIf using workbenches standard Service forms, the Kms/Hours will be updated on the equipment utilisation. The maintenance alert will disappear and the equipment will show as normal again  Image Addedend process
|